Additional information

TP8T

RYCO SPIDERLINE

R8 TWIN HOSE

RECOMMENDED FOR:
Ryco TP8T SPIDERLINE TWIN Hose consists of two TP8 Series Hoses of the same size, permanently joined together in a flat compact form that can be easily reeled onto payout and return reels on forklifts and cranes. It is also used on dispensing equipment and other applications requiring two hoses.

High pressure hydraulic oil lines; pilot lines; greasing and lubrication lines; and some pneumatic and water lines. Suitable for use with mineral, vegetable and most ester based hydraulic fluids. Suitable for use with some gases, fluids and chemicals. Cover is perforated (pin-pricked) for use with air and gases.

Ryco SPIDERLINE hose is lighter weight, has a more compact outside diameter and is less than half the minimum bend radius of wire braided rubber hose. Smooth inner tube for high flow rate; and smooth, easily cleaned cover.

The synthetic and aramid fibre reinforcement gives SPIDERLINE hose excellent corrosion and fatigue resistance plus low elongation at maximum dynamic working pressure.

PERFORMANCE:
Meets or Exceeds the Performance Requirements of:
AS 3791 100R8, EN 855 TYPE R8, ISO 3949, SAE 100R8.

TUBE:
White, oil resistant seamless thermoplastic (Polyester).

REINFORCEMENT:
One or two braids of aramid fibre.

COVER:
Black, oil and abrasion resistant thermoplastic
(Polyurethane). Cover is perforated (pin-pricked).

TEMPERATURE RANGE:
From -40°C to +100°C (-40°F to +212°F).
Air & Water +70 ˚C (+158 ˚F).

WORKING PRESSURE:
Maximum working pressures are based on 4:1 safety factor (maximum working pressure to minimum burst pressure).

COUPLINGS:
NON-SKIVE ONE-PIECE CRIMP
TP000 Series (Sizes -04 to -16).

Refer to the Ryco Crimp App for the latest crimping parameters.

DISCLAIMER

We reserve the right to modify our products and/or related services and/or discontinue the manufacture and/or supply of any of the products and/or related services, without notice. This document supersedes all previous versions and previously issued documentation. The only official source of technical crimping parameters regarding our products is our Digital Crimp Tools. Printed copies are uncontrolled therefore, please be sure to use the latest versions of our Ryco Crimp App or Ryco Crimp Web Tool. Don’t mix and match: always use original hoses and fittings. For more information, see our Safety Guide.