Additional information

TP7N

RYCO ISOLATOR

R7 NON CONDUCTIVE HOS

RECOMMENDED FOR:
Hydraulic oil lines where electrical non-conductivity is required (for use in applications where there is potential for contact with high voltage sources). Suitable for use with mineral, vegetable and most ester based hydraulic fluids. Heat and hydrolysis stabilised for use with water based hydraulic fluids up to +70°C (+158°F). Smooth inner tube for high flow rate; and smooth, easily cleaned cover.

The high strength, non-metallic reinforcement gives these hoses excellent corrosion and fatigue resistance, and low elongation of ±2% at maximum dynamic working pressure.

PERFORMANCE:
Meets or Exceeds the Performance Requirements of:
AS 3791 100R7, EN 855 TYPE R7, ISO 3949, SAE 100R7.

TUBE:
White, oil resistant seamless thermoplastic (Polyester).

REINFORCEMENT:
One or two braids of synthetic fibre.

COVER:
Orange, oil and abrasion resistant thermoplastic (Polyurethane). Cover is non-perforated.

FEATURES:
Meets non-conductivity requirements of SAE 100R7,
AS 3791 100R7, EN 855 Type 7 (maximum leakage does not exceed 50 μA when subjected to 75 kV/305 mm or 250 kV/m for 5 minutes). Incorrect storage and use, particularly that
leading to oil or moisture entering the reinforcement, may adversely affect electrical properties.

TEMPERATURE RANGE:
From -40°C to +100°C (-40°F to +212°F).
Air & Water +70 ˚C (+158 ˚F).

WORKING PRESSURE:
Maximum working pressures are based on 4:1 safety factor (maximum working pressure to minimum burst pressure).

COUPLINGS:
NON-SKIVE ONE-PIECE CRIMP
TP000 Series (Sizes -04 to -16).

Refer to the Ryco Crimp App for the latest crimping parameters.

DISCLAIMER

We reserve the right to modify our products and/or related services and/or discontinue the manufacture and/or supply of any of the products and/or related services, without notice. This document supersedes all previous versions and previously issued documentation. The only official source of technical crimping parameters regarding our products is our Digital Crimp Tools. Printed copies are uncontrolled therefore, please be sure to use the latest versions of our Ryco Crimp App or Ryco Crimp Web Tool. Don’t mix and match: always use original hoses and fittings. For more information, see our Safety Guide.