Additional information
RHYS
RHYS
Packaging Sleeve
RECOMMENDED FOR:
Packaging and protection of hose assemblies, in transit and in storage. Ryco RHYS Packaging Sleeve is installed over the finished hose assembly. The ends may be heat sealed, or folded over and stapled, or taped closed.
CONSTRUCTION:
Heavy gauge low density polyethylene clear plastic tubing; printed at intervals with “Ryco” logo, and incorporating an area for the hose assembly Part Number to be written.
ASSEMBLY INSTRUCTIONS:
- Select correct size of Ryco RHYS Packaging Sleeve. It must be large enough to allow for the maximum outside profile of the hose couplings.
- Two sizes are available:
- RHYS-75 suits most hoses up to -16 (1”) hose bore.
- RHYS-125 suits most hoses from -16 to -32 (1” to 2”) hose.
- If required, write the hose assembly Part Number onto the Packaging Sleeve using a ball point pen.
- Slide the hose assembly into the RHYS Packaging Sleeve.
- Trim Packaging Sleeve to length, and seal ends.
STANDARD COIL LENGTHS:
350 metres (1,150 feet).
Related products
DISCLAIMER:
We reserve the right to modify our products and/or related services and/or discontinue the manufacture and/or supply of any of the products and/or related services, without notice. This document supersedes all previous versions and previously issued documentation. The only official source of technical crimping parameters regarding our products is our Digital Crimp Tools. Printed copies are uncontrolled therefore, please be sure to use the latest versions of our Ryco Crimp App or Ryco Crimp Web Tool. Don’t mix and match: always use original hoses and fittings. For more information, see our Safety Guide.