PL1D Extra Abrasion Resistant FRAS

RECOMMENDED FOR:
Petroleum base hydraulic oils, glycol antifreeze solutions, water, diesel fuels, and air.

PERFORMANCE:
Meets or Exceeds the Performance Requirements of:
AS 3791 100R6, DIN 20021-1TE, ISO 4079 Type R6, SAE 100R6.

TUBE:
Black, oil resistant synthetic rubber.

REINFORCEMENT:
One textile braid.

COVER:
DIEHARD™ Black, oil and extra abrasion resistant synthetic rubber. Flame Resistant, Anti-Static (FRAS) & MSHA compliant. No skiving required with T4000 Series Crimp Couplings.

FRAS – FLAME RESISTANCE AND ANTI-STATIC:
DIEHARD™ FRAS textile braided hose meets or exceeds the Flame Resistance of U.S.A. MSHA Code of Federal Regulations Title 30 Part 18 Section 18.65 and the Anti-Static requirements of MDG 41, AS1180-13A and ISO 8031 having a resistance of less than 1MΩ per metre.

TEMPERATURE RANGE:
From -40°C to +100°C (-40°F to +212°F).

WORKING PRESSURE:
Maximum working pressures are based on 4:1 safety factor (maximum working pressure to minimum burst pressure). PL1D Hose, and 8000 Series Push-On Fittings, are recommended for use in systems with Static Working Pressures (constant loads without pressure spikes) only. They are not recommended for vibration or pressure surge applications. PL1D Hose should not be used at both maximum working pressure and maximum temperature simultaneously.

COUPLINGS:
NON-SKIVE ONE-PIECE CRIMP
T4000 Series (Sizes -04 to -12).

FIELD ATTACHABLE NON-SKIVE
8000 Series Push-On (sizes -04 to -12).
PL1D Hose simply pushes on to 8000 Series Couplings.
For diesel fuel and other potentially dangerous, or critical applications crimp fittings are required.